Cooling Tower: Model WP1250-40
| Tower Specifications Nominal tonnage: 40ton / 176KW Fan motor: 2hp 1140rpm, TEFC Nominal Air Flow: 12,000 CFM Flow: 120gpm Entering Water Temp: 95F / 35C Leaving Water Temp: 85F / 29.4C Wet Bulb: 78F/25.5C Tower basin volume: 100gallons Dimensions: 48”x 48” x 102” Unit Weight: 630 lbs |
 |
| Package includes: 40 ton WP1250-40 cooling tower FRP composite material with slip-fit design Accu-Pac fill pack Accu-Pac drift eliminator Cellular inlet louvers Sk80 PVC manifold with one dek spray nozzle 2″ sk80 PVC inlet flange Side or bottom outlet drain depending on your requirements Steel Tower platform: Dim 48″x48″ with fork slots 3phase 208-230 or 460v 1/2HP fan motor (other voltages available)Optional items: Fan temperature control package Remote control panel Pump tank configurations Filtration Heat exchangers/closed loop systems Custom frames |
Standard Feature Details
Standard Feature Details
Construction material details:
Non-corrosive FRP(Fiberglass Reinforced Polyester) marine grade resinsSurface layer containing pigmented gel coat
Ultraviolet (UV) inhibitor included as an additive to the composite matrix.
Accu-Pak cross fluted fill pack:
Improves water distribution by splitting water stream 8 times in a 12” vertical path as it descends through the fill pack
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
Accu-Pac counterflow cellular drift eliminators
High surface area provides maximum performance at minimum pressure drop
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
Cellular Inlet Louvers installed:
Improve air flow into cooling tower
Prevent debris from entering
Eliminate water splash-out that can cause icing, water treatment chemical loss
Restricts amount of sunlight into cooling tower impeding algae growth
Reduce noise from tower
Improve tower’s appearance
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
Lightweight ABS plastic non-clogging Dek-Spray nozzles
serviceable at temperatures up to 180F/82C
Results in less system weight & piping cost
Side or bottom outlet drain
Location and size of outlet fitting determined according to your requirements
Other Features
1-1/2″ Schedule 80 distribution header |
1-1/2″ PVC inlet flange |
½” automatic water makeup |
Stainless steel hardware |
Glossy white color |
Optional Item Details:
| Tower platform: Dim 32″x32″ with fork slots 4″ C-Channel Sheered sheet metal cover with cut-out for tower drain Painted with gray Macropoxy 646 Fast Cure Epoxy (high solids, high build, polyamide epoxy designed to protect steel and concrete in industrial exposures)Basic field assembled tower stand elevates tower 4-10′Fan Temperature Control PackageRemote Panel with digital readoutPump tank configurations, filtration, heat transfer systems etc. |
 |
Tower Layout
